While bamboo floorings sound much different, the base construction is pretty similar to the hardwood floors. There are a couple of bamboo flooring types, including horizontal, vertical, and strand-woven.
Depending on the type, it offers better water resistance and can be harder to cut than your classic pine/oakwood floor. With that in mind, it is essential to find the best saw blade for cutting bamboo flooring.
To help you, we’ve prepared a thorough review of the top five products, as well as a buying guide covering the essentials and an extensive FAQ section. Without further ado, let’s get started!
The 5 Best Saw Blade for Cutting Bamboo Flooring
Let’s check the top blades that are created for the purpose of cutting of bamboo flooring.
1. NORSKE TOOLS BLADE FOR BAMBOO FLOORING – EDITOR’S PICK
Manufactured by one of the leading brands, Norske Tools, it is a carbide saw that is set at 5.4×5.4×0.12 inches in size and weighs just around 3.2 ounces. It offers a sophisticated metric system that makes this saw blade a nice choice if you have no previous experience. Featuring a 5/8-inch arbor with two bushings and a 25-degree hook angle, you can expect it to offer superb performance when cutting floorings tougher than hardwood. Is it highlighting a point? The 24-sharp teeth ensure it gets through almost any material.
Super Fine Cutting Edge
When it comes to performance, you can rely on the AT/AF grind that works together with carbide tips to provide cutting-edge precision. With that in mind, it is a blade saw that can be used by DIY carpenters and professionals alike. This NORSKE TOOLS product is suitable for framing and heavier applications that require a sturdier saw body.
Advanced Sock-Technology
As we have mentioned above, this blade saw comes with 24-sharp teeth. Not only that, but the manufacturer included a sophisticated sock technology which goes a long way when it comes to the sturdiness of this product. Furthermore, the superb tooth support means that you will have to invest less time in maintaining this saw blade.
Fast Cutting in Heavy Load Applications
Among the variety of innovative design details, we have to highlight the 25-degree hook angle, which ensures that you can cut at optimal speed. The aggressive angle and the premium steel construction will allow you to cut through hard bamboo flooring with absolute ease.
Pros
- Suitable for framing and heavy load applications
- Offers high-operating speed with an aggressive 25-degree hook angle
- It comes with 24 sharp teeth, which are secured with advanced sock technology
- Highlighted by cutting-edge precision
- Set at an affordable price
Cons
- Leaves saw cutting marks on tougher floorings
2. Freud 7-1/4″ x 60 Thin Kerf Ultimate Plywood & Melamine Blade
Manufactured by Freud, one of the leading saw blade brands in Italy, and this product comes with a 7.25-inch diameter and a 5/8-inch arbor. Unlike the Norske Tools, it is highlighted by a 2-degree hook angle and is ideal if you are looking for a saw blade with a Hi-ATB grind. Most importantly, it operates on a 0.063-inch plate with 60 sharp teeth.
Ti-Co HI-Density Coating
The HI-Density coating is key to the versatile performance that this cutting saw blade offers. You will be able to cut through bamboo, plywood, melamine, and other hardwood floorings with little to no effort.
Plywood Cover
One of the coolest points of this saw blade for cutting bamboo flooring is the plywood coating which protects it from everyday tear/wear and prevents dirt and debris from building up. Not only that, but it also ensures that you are met with minimal drag while using this product.
Anti-Vibration Slots
Last but certainly not least are the laser-cut slots that make this saw blade suitable for beginners. Apart from reducing vibration, it plays an important role in preventing saw-cutting residues and splinters.
Pros
- Perfect for cutting through bamboo, plywood, melamine
- It comes with 60 extra-sharp teeth
- Reduced drag and vibration
- HI-density coating for heavy load applications
Cons
- It doesn’t work with the Makita track saw
3. MERCER ABRASIVES CARBIDE WOOD CUTTING BLADE
If you are looking for a saw blade that cuts through plastic, laminate, and bamboo flooring, then the MERCER ABRASIVES has the right product for you. It is perfect to be used on miter saws, it is set at 12x12x0.63 inches in size and comes with 96 sharp teeth. Not only that, but it features two different arbors – a 1-inch and a 5/8-inch, which is why we consider it to be one of the most versatile saw blades on the market.
Extraordinary Control
The highlighting point of this saw blade has to be the clean and accurate cut that you will get. Firstly, it features anti-vibration vents that both minimize the produced noise and cut out any vibration or drag. With that in mind, you will be able to get through heavy-duty floorings while maintaining optimal control over the MERCER ABRASIVES blade.
No Residues
It is also heat-expanding, which enhances the overall accuracy and ensures that this saw blade doesn’t leave swirls, marks, or cutting residues. Thus, you will get to enjoy a smooth top finish.
Thin Kerf Configuration
Last but certainly not least, the TCG setup of the featured 96 teeth goes a long way in terms of powerful cutting. In our experience, this saw blade can reach up to 6000 rotations per minute.
Pros
- Offers superb accuracy and control
- Reaches up to 6000 rotations per minute
- It doesn’t leave swirl marks or cutting residues
- Comes with 96 extra-sharp teeth
- It gets through bamboo, plastic, and laminate
Cons
- Set at a higher price
4. BOSCH DCB1072 Daredevil
Moving on with our list of the best saw blade for cutting bamboo flooring is another carbide product made to cut through engineered and regular wood. It is set at 12x14x0.31 inches in size and weighs just around 1.72 ounces. In addition to that, it offers 72 teeth that are sharp enough to resist harder bamboo.
Thin Kerf
Similar to the product mentioned above, it comes with a Thin Kerf coating essential for allowing high-operating power and clean cuts. Not only that, but it minimizes splinters and other waste.
Premium Steel Body
When it comes to durability, this BOSCH product is the one that you can rely on. It is highlighted by an extended steel body, brute carbide, and a negative hook angle that work together to offer a long blade life and powerful cutting performance (in high-abrasion environments).
Triple Chip Grind
Another fantastic detail is the triple chip geometry which stands to improve its operating power and resistance against harder floorings.
Pros
- Highlighted by a premium steel body with brute carbide
- It offers a long blade life
- Negative hook angle to offer more control and accuracy
- Thin kerf coating enhances cutting speed and reduces waste
Cons
- It isn’t as easy to control
5. AYAO BANDSAW BLADES FOR HARD BAMBOO MATERIAL
Last but certainly not least is a 72×1/4-inch blade that comes with 14 teeth per single inch and is designed to cut through bamboo, laminate, and hardwood surfaces. It is made out of carbon steel and should resist everyday use.
Sophisticated Welding
The highlighting point of this product is its sophisticated design and the fact that you will be able to weld with more accuracy and control. The innovative welding technique will allow you to get through the bamboo floorings with less effort than using a common saw blade.
Raker Arrangement
While not a usual solution, it ensures that you are getting 14 sharp teeth per single inch.
Thin Blade Construction
Surprisingly, the carbon steel blades do a fantastic job in highly abrasive environments, mostly due to the thin construction.
Pros
- Simple to weld and control
- It offers fantastic cutting accuracy
- Thin blades made to withstand everyday use
- Raker teeth arrangement, 14-teeth on every inch
Cons
- Not for heavy load
Related posts:
Buying Guide for Blades that Cut Bamboo Flooring
Much like buying any other product, you need to consider a few essential points:
Is It For a Manual or a Motor-Operated Saw?
The answer to this question depends on your skill level and whether you are more comfortable cutting with a saw machine or a manual blade.
Versatility
The second essential is to look for a saw blade that can cut through much more than bamboo flooring, including PVC, laminate, and hardwood surfaces.
Operating Speed
What you should know is that the fewer teeth your saw blade has, the faster it operates. Furthermore, blades with more teeth are perfect for fine cuts.
Carbide Blades
If you want to cut through hard bamboo flooring with little to no effort, then you should look for blades made out of sophisticated carbide material.
FAQ’s Bamboo Flooring Blades
Can You Cut Bamboo Without Splinters/Waste?
Absolutely. Mark a line using duck tape, then cut across it with an accurate saw blade (circular) that comes with minimal drag.
Is Bamboo Hard to Cut?
While it is a lightweight material, bamboo flooring can be pretty tough. Still, if you invest in a carbide saw blade, the job becomes much easier.
What Type of Saw Is the Best for Cutting Bamboo Flooring?
Circular, as it offers more control and will allow you to cut without splinters/waste.
What Type of Saw Is the Best for Finest Cuts?
You are best off using a crosscut with a carbide saw blade. It will allow you to create a smooth top finish with no swirl markings or cutting residues.
How to Cut Through Bamboo Plank?
It all depends on the type of saw you are using. If you are working with a circular/miter saw, you should go for the cross-cutting technique, while a table/bend saw would require straight cuts.
Are More Teeth on a Saw Blade Better?
It all depends on what you are looking for. It is your best choice if you are a fan of saw blades that offer fine and waste-free cuts.
Is It Possible to Cut a Bamboo Flooring with a Circular Saw?
As we have mentioned, it is one of the best saws to cut with, allowing for clean and splinter-free cuts.
Should You Nail Bamboo Flooring?
Yes, you are looking to cover hardwood flooring with strand-woven bamboo.

I love to share my expertise and love for the art of woodworking with others, providing tips and tricks, reviews of saws and other tools, and inspiration for new projects.